An Origami Microfluidic Battery: A Low-cost Activity
- Conference
- Location
-
Columbus, Ohio
- Publication Date
-
June 24, 2017
- Start Date
-
June 24, 2017
- End Date
-
June 28, 2017
- Conference Session
- Tagged Division
-
Materials
- Page Count
-
14
- DOI
-
10.18260/1-2--27586
- Permanent URL
-
https://peer.asee.org/27586
- Download Count
-
934
Paper Authors
Linda Vanasupa California Polytechnic State University, San Luis Obispo
Linda Vanasupa has been a professor of materials engineering at the California Polytechnic State University since 1991. She also serves as co-director of the Center for Sustainability in Engineering at Cal Poly. Her life's work is focused on creating ways of learning, living and being that are alternatives to the industrial era solutions--alternatives that nourish ourselves, one another and the places in which we live. Her Ph.D. and M.S. degrees are in materials science and engineering from Stanford University and her B.S. degree in metallurgical engineering from the Michigan Technological University.
Rishi Kripalani
Abstract
Paper microfluidic technologies are emerging as a promising disruptive technology for low-cost sensing and detection. Researchers have developed a number of sensing and actuating devices that allow the design and creation of microfluidic devices using standard office software and equipment. These devices can be easily designed and produced in a first- or second-year engineering laboratory. This paper will discuss a novel design of a folded, paper microfluidic battery based on the work of N. Thom et al. that can power a surface-mounted light-emitting diode. This origami design, named for the Japanese art of folding paper called origami, allows one to print and assemble postage-stamp sized paper batteries for an initial equipment investment of under $1000 (a wax printer and micropipettes). Although the start-up cost of supplies is a few hundred dollars, the approximate cost per postage-stamp sized battery is on the order of $0.10. The design presented here has a folded footprint of 1 cm2 and outputs an open circuit voltage of 2.5 V for over 15 minutes. Once printed, the dosing of electrolytes and the salt bridge, assembly and testing can be done in about 2 hours. Like standard batteries, the voltage output reflects the chemical potential difference of the electrode metals and the flow of current happens through ion transport in the electrolytes and salt bridge. This origami paper microfluidic battery is a low-cost activity that deepens the understanding of capillary action, chemical potential, and charge transport in batteries. It also represents a hands-on way to introduce students to the emerging technology of paper microfluidics.
Vanasupa, L., & Kripalani, R. (2017, June), An Origami Microfluidic Battery: A Low-cost Activity Paper presented at 2017 ASEE Annual Conference & Exposition, Columbus, Ohio. 10.18260/1-2--27586
ASEE holds the copyright on this document. It may be read by the public free of charge. Authors may archive their work on personal websites or in institutional repositories with the following citation: © 2017 American Society for Engineering Education. Other scholars may excerpt or quote from these materials with the same citation. When excerpting or quoting from Conference Proceedings, authors should, in addition to noting the ASEE copyright, list all the original authors and their institutions and name the host city of the conference. - Last updated April 1, 2015