Sergeyev, A., & Mehandiratta, P., & Kuhl, S. A. (2019, April), Non-Destructive, Remote Control of Industrial Robotic Arm   Paper presented at 2019 Pacific Southwest Section Meeting, California State University, Los Angeles , California. 10.18260/1-2--31838

\bibitem{asee_peer_31838}
  Sergeyev, A., \& Mehandiratta, P., \& Kuhl, S. A. (2019, April), \emph{Non-Destructive, Remote Control of Industrial Robotic Arm }
  Paper presented at 2019 Pacific Southwest Section Meeting, California State University, Los Angeles , California.
  10.18260/1-2--31838

Aleksandr Sergeyev, Prince Mehandiratta, and Scott A Kuhl.  "Non-Destructive, Remote Control of Industrial Robotic Arm ".  2019 Pacific Southwest Section Meeting, California State University, Los Angeles , California, 2019, April.  ASEE Conferences, 2019.  https://strategy.asee.org/31838 Internet.  14 May, 2024

\bibitem{asee_peer_31838}
  Aleksandr Sergeyev, Prince Mehandiratta, and Scott A Kuhl.
  "Non-Destructive, Remote Control of Industrial Robotic Arm ".
  \emph{2019 Pacific Southwest Section Meeting, California State University, Los Angeles , California, 2019, April}.
  ASEE Conferences, 2019.
  https://strategy.asee.org/31838 Internet.  14 May, 2024

@INPROCEEDINGS{asee_peer_31838
author = "Aleksandr Sergeyev, Prince Mehandiratta, and Scott A Kuhl"
title = "Non-Destructive, Remote Control of Industrial Robotic Arm "
booktitle = "2019 Pacific Southwest Section Meeting"
year = "2019"
month = "April"
address = "California State University, Los Angeles , California"
publisher = "ASEE Conferences"
note = {https://strategy.asee.org/31838}
number = {10.18260/1-2--31838}
}

TY  - CPAPER
AB  - Intend to follow up with a full paper

Virtual robots are perplexing for a beginner level robotics programmer. This project is an application of a new concept with the available virtual robot technology to make a non-destructive remotely controlled robotic arm, to better teach students and researches about programming and control of a robotic arm. Since there is no commercially available remotely controlled robotic arm, and due to the expensive cost of robotic arms, students and researchers are often unable to test their programs on real robots. By applying the concept of a remote controlled robotic arm, the existing resources can be effectively shared with other universities to teach programming aspects of industrial robots. Using developed system, allowing the remote access to the physical robot, interested parties can test their programs with a real robotic arm instead of simply working in robotic simulation environment. 

In order to achieve this goal, the system consisting of a hardware, non-destructively controlling the teach pendant (TP) of a physical robot, the video capturing and transmitting system, and the website to be used by the client to remotely access, control, and program an industrial robotic arm have been designed. In order to gain a remote access to the robot, the client requests a login token for the time and duration of the access to the robot. Upon receiving an approval from an administrator, the user is provided with a teach pendant control web link, which is time-limited for the granted time slot. The interface for the client consists of the virtual TP, a display of the real TP screen and two display screens showing the robot from different angles. When the client presses any input on the virtual TP, the data is transmitted via the internet to the arm server, which, using Modbus TCP/IP to communicate with a programmable logic controller (PLC), activates the hardware to non-destructively control the real TP. The vision system implements the digital camera, mounted above the real TP’s display to capture and feed real-time data. The video signals captured by the vision system from the real TP, as well as physical robot are transmitted to the vision system server, which sends the video stream to the client enabling the user to observe in real-time TP display activities and motion of the robotic arm. The developed non-destructive robotic control system enables remote access to the users wishing to learn robotic programming concepts. While robotic simulation software can be used to achieve this, the proposed solution provides an actual interactivity with the physical system, allowing the user to interact with the robotic arm and learn the programming skills utilizing the industrial robot widely used in industry.     

AU  - Aleksandr Sergeyev
AU  - Prince Mehandiratta
AU  - Scott A Kuhl
CY  - California State University, Los Angeles , California
DA  - 2019/04/04
PB  - ASEE Conferences
TI  - Non-Destructive, Remote Control of Industrial Robotic Arm 
UR  - https://strategy.asee.org/31838
DO  - 10.18260/1-2--31838
ER  -