Taufik, T. (2017, April), Teaching the Hands-on Magnetic Design Laboratory Course: Experience and Lessons Learned  Paper presented at 2017 Pacific Southwest Section Meeting, Tempe, Arizona. 10.18260/1-2--29237

\bibitem{asee_peer_29237}
  Taufik, T. (2017, April), \emph{Teaching the Hands-on Magnetic Design Laboratory Course: Experience and Lessons Learned}
  Paper presented at 2017 Pacific Southwest Section Meeting, Tempe, Arizona.
  10.18260/1-2--29237

Taufik Taufik.  "Teaching the Hands-on Magnetic Design Laboratory Course: Experience and Lessons Learned".  2017 Pacific Southwest Section Meeting, Tempe, Arizona, 2017, April.  ASEE Conferences, 2017.  https://strategy.asee.org/29237 Internet.  13 May, 2024

\bibitem{asee_peer_29237}
  Taufik Taufik.
  "Teaching the Hands-on Magnetic Design Laboratory Course: Experience and Lessons Learned".
  \emph{2017 Pacific Southwest Section Meeting, Tempe, Arizona, 2017, April}.
  ASEE Conferences, 2017.
  https://strategy.asee.org/29237 Internet.  13 May, 2024

@INPROCEEDINGS{asee_peer_29237
author = "Taufik Taufik"
title = "Teaching the Hands-on Magnetic Design Laboratory Course: Experience and Lessons Learned"
booktitle = "2017 Pacific Southwest Section Meeting"
year = "2017"
month = "April"
address = "Tempe, Arizona"
publisher = "ASEE Conferences"
note = {https://strategy.asee.org/29237}
number = {10.18260/1-2--29237}
}

TY  - CPAPER
AB  - Magnetic components such as inductors and transformers have been used extensively in the practice of electrical engineering. Electrical systems ranging from small portable consumer electronics and large scale utility transmission and distribution systems utilize magnetic components. Despite their importance, magnetic components are typically covered in undergraduate electrical engineering curriculum from high level system overview focusing on their functionalities and their steady-state and transient impacts on electric circuits. This provides students with the necessary analytical and technical skills to perform simple to complex circuit designs. However, for many engineering companies most notably test and application engineers in the power semiconductor industry, electrical engineers are usually expected to possess the basic skill in the design and construction of their own magnetic components. Such skill is crucial in the prototyping phase as well as in the optimization process of the circuit design. The importance in providing electrical engineering undergraduate students with the magnetic component design skillset has in fact long been recognized by industrial group and has encouraged several universities in the US to introduce more applied magnetic design into their undergraduate curricula. To address this issue, Cal Poly State University recently developed a magnetic design course offered as a technical elective for electrical engineering undergraduate students. The course has two components: lecture and laboratory. This paper focuses on the laboratory content of the course. The five laboratory experiments that were developed for the course will be detailed in this paper along with the laboratory hardware modules and their expected student learning outcomes. Experience, challenges, and lessons learned in developing and teaching the newly developed course will also be presented.
AU  - Taufik Taufik
CY  - Tempe, Arizona
DA  - 2017/04/20
PB  - ASEE Conferences
TI  - Teaching the Hands-on Magnetic Design Laboratory Course: Experience and Lessons Learned
UR  - https://strategy.asee.org/29237
DO  - 10.18260/1-2--29237
ER  -