Centrifugal Pump Test Bed: A Senior Capstone Project
- Conference
- Location
-
Pittsburgh, Pennsylvania
- Publication Date
-
June 22, 2008
- Start Date
-
June 22, 2008
- End Date
-
June 25, 2008
- ISSN
-
2153-5965
- Conference Session
- Tagged Division
-
Mechanical Engineering
- Page Count
-
15
- Page Numbers
-
13.282.1 - 13.282.15
- DOI
-
10.18260/1-2--3954
- Permanent URL
-
https://peer.asee.org/3954
- Download Count
-
4714
Paper Authors
Robert Choate Western Kentucky University
Robert Choate teaches thermo-fluid and professional component courses in Mechanical Engineering, including the Sophomore Design, Junior Design, the Senior ME Lab I and the ME Senior Project Design course sequence. Prior to teaching at WKU, he was a principal engineer for CMAC Design Corporation, designing telecommunication, data communication and information technology equipment.
Kevin Schmaltz Western Kentucky University
Kevin Schmaltz teaches thermo-fluid and professional component courses in Mechanical Engineering, including the Freshman Experience course, Sophomore Design, Junior Design and the Senior Project Design course sequence. Prior to teaching at WKU, he was a project engineer for Shell Oil, designing and building oil and gas production facilities for offshore platforms in the Gulf of Mexico.
Joel Lenoir Western Kentucky University
Joel Lenoir is the Layne Professor of Mechanical Engineering at WKU, and primarily teaches in the dynamic systems and instrumentation areas of the curriculum. His industrial experience includes positions at Michelin Research and Oak Ridge National Laboratory, as well as extensive professional practice in regional design and manufacturing firms.
Abstract
NOTE: The first page of text has been automatically extracted and included below in lieu of an abstract
Centrifugal Pump Test Bed: A Senior Capstone Project
Abstract A centrifugal pump test bed was designed, built and tested for the undergraduate mechanical engineering thermal fluids laboratory at Western Kentucky University. This project was funded through the Undergraduate Senior Project Grant Program sponsored by the American Society of Heating, Refrigeration, and Air Conditioning Engineers, Inc. (ASHRAE) and is primarily intended for instructional situations.
The project was executed over a two-semester Mechanical Engineering Senior Project design sequence, with a three-member student team planning the project design during the fall semester and executing the project construction and testing during the spring.
The final system delivered uses two 1.0 horsepower pumps that can generate a range of volumetric flows and a piping system capable of varied impedances and flow paths. A useful innovation by the team was the capability of modifying pump impeller diameter, as well as flow paths. Existing hands-on laboratory courses now have a centrifugal pump test bed to demonstrate the full complement of pump similitude: series and parallel configurations, rotational speed effects, and varied impeller size.
During the senior design course sequence, the students generated a design and selected critical components in the pump demonstration bed to provide the desired capabilities, executed the project construction demonstrating their ability to work together as a team, managed the project and maintained a schedule within time and fiscal budgetary constraints, and finally implemented appropriate testing of the final system through an experimental test plan to assure that the desired quality was achieved. This paper will detail project outcomes and faculty observations of the process and assessment of student work.
Introduction Every year the American Society of Heating, Refrigeration, and Air Conditioning (ASHRAE) funds the Undergraduate Senior Project Grant Program, which awards schools grants for the execution of senior projects. The grants are often used to design, construct and test projects. The distribution of these funds is based on the relevance of the proposal to educational endeavors in the Heating, Ventilation, Air Conditioning and Refrigeration (HVAC&R) disciplines. 1, 2, 3
In 2005, ME seniors and their faculty advisor in the ME Senior Lab I course at Western Kentucky University submitted a proposal to the ASHRAE Undergraduate Senior Project Grant Program, requesting funds to design, build and test (DBT) a Centrifugal Pump Demonstration System. The proposal was selected by ASHRAE as one of the projects to be funded for the 2006 – 2007 academic year.
The stated scope of the project was to design, build and test (DBT) an educational demonstration or instructional unit to allow undergraduate students to evaluate the behavior of centrifugal pumps in a variety of operating conditions. The unit was to be used to complement an engineering science course in fluid mechanics by providing mechanical engineering students
Choate, R., & Schmaltz, K., & Lenoir, J. (2008, June), Centrifugal Pump Test Bed: A Senior Capstone Project Paper presented at 2008 Annual Conference & Exposition, Pittsburgh, Pennsylvania. 10.18260/1-2--3954
ASEE holds the copyright on this document. It may be read by the public free of charge. Authors may archive their work on personal websites or in institutional repositories with the following citation: © 2008 American Society for Engineering Education. Other scholars may excerpt or quote from these materials with the same citation. When excerpting or quoting from Conference Proceedings, authors should, in addition to noting the ASEE copyright, list all the original authors and their institutions and name the host city of the conference. - Last updated April 1, 2015