Prototyping Low-Cost Tribometer with Block on Ring Configuration for the Optimization of Metal-Forming Applications

Immanuel Edinbarough; Jose Jaime Taha-Tijerina

Download Paper | Permalink

Conference: 2024 ASEE Annual Conference & Exposition
Location: Portland, Oregon
Publication Date: June 23, 2024
Start Date: June 23, 2024
End Date: July 12, 2024
Conference Session: Hands-On Learning in ET I
Tagged Division: Engineering Technology Division (ETD)
Tagged Topic: Diversity
Permanent URL: https://peer.asee.org/47902

Request a correction

Paper Authors

biography

Immanuel Edinbarough The University of Texas, Rio Grande Valley

visit author page

Dr. Immanuel A. Edinbarough is a Professor and Lead in the Engineering technology program in the Department of Informatics and Engineering Systems at the College of Engineering and Computer Science, University of Texas Rio Grande Valley.

visit author page

author page

Jose Jaime Taha-Tijerina The University of Texas, Rio Grande Valley orcid.org/0000-0001-6781-9414

Download Paper | Permalink

Abstract

Prototyping a low-cost tribometer with block on ring configuration for the optimization of metal-forming applications

Applications in the metal-mechanic industry require the analysis and support of tribo-evaluations in their manufacturing processes. Experimentation with various metals and components could be performed under controlled conditions, including the ability to apply testing with a fluid or lubricant media or in dry conditions. The aim of this work is to design and fabricate a working block for a ring tribometer at low cost. Present and future stakeholders will have the ability to analyze material properties in friction, wear, and displacement while saving the university over 500% in costs of an industrial tribometer. The integrity of the machine must adhere to ASTM G-77 guidelines and be able to withstand a load force up to 7.8 kg. Operation must be able to perform under the specified load function while maintaining 72 rpm. The machine will be housed in the Engineering Technology lab for easy accessibility and will also be on a cart for mobility options to different locations. Consistent contact between surfaces causes friction and wear resulting in the loss of structural integrity of the material over time. Therefore, lubrication and design play an intricate role in improving the life of metals operating under various load conditions. The prototype tribometer was built at low cost, user-friendly and interactive to run research experiments on friction and wear under various conditions (metals, lubricity, etc.). Alternative lubrication additives have become some of the industry's top sources to crack the code for longer lasting and more durable metal-forming applications. In this study, specimens taken from steel and aluminum-based metal samples were tested in a block-on-ring prototype for wear performance over various parameters including number of revolutions and time. Specimens also underwent tests with lubrication additives to further validate the life extent of metals under certain forces. Experiments were conducted with block-on-ring prototypes on aluminum rings and steel specimens. The tribometer prototype was validated and satisfied the necessary operating protocols under ASTM standards (ASTM D2714, ASTM G77). This project was successfully completed by students from the Engineering Technology program at the University of XXX XXX.

Citation
Format

Edinbarough, I., & Taha-Tijerina, J. J. (2024, June), Prototyping Low-Cost Tribometer with Block on Ring Configuration for the Optimization of Metal-Forming Applications Paper presented at 2024 ASEE Annual Conference & Exposition, Portland, Oregon. https://peer.asee.org/47902

TY - CPAPER
AB - Prototyping a low-cost tribometer with block on ring configuration for the optimization of metal-forming applications

Applications in the metal-mechanic industry require the analysis and support of tribo-evaluations in their manufacturing processes. Experimentation with various metals and components could be performed under controlled conditions, including the ability to apply testing with a fluid or lubricant media or in dry conditions.
The aim of this work is to design and fabricate a working block for a ring tribometer at low cost. Present and future stakeholders will have the ability to analyze material properties in friction, wear, and displacement while saving the university over 500% in costs of an industrial tribometer. The integrity of the machine must adhere to ASTM G-77 guidelines and be able to withstand a load force up to 7.8 kg. Operation must be able to perform under the specified load function while maintaining 72 rpm. The machine will be housed in the Engineering Technology lab for easy accessibility and will also be on a cart for mobility options to different locations.
Consistent contact between surfaces causes friction and wear resulting in the loss of structural integrity of the material over time. Therefore, lubrication and design play an intricate role in improving the life of metals operating under various load conditions. The prototype tribometer was built at low cost, user-friendly and interactive to run research experiments on friction and wear under various conditions (metals, lubricity, etc.).
Alternative lubrication additives have become some of the industry&#39;s top sources to crack the code for longer lasting and more durable metal-forming applications. In this study, specimens taken from steel and aluminum-based metal samples were tested in a block-on-ring prototype for wear performance over various parameters including number of revolutions and time. Specimens also underwent tests with lubrication additives to further validate the life extent of metals under certain forces.
Experiments were conducted with block-on-ring prototypes on aluminum rings and steel specimens. The tribometer prototype was validated and satisfied the necessary operating protocols under ASTM standards (ASTM D2714, ASTM G77). This project was successfully completed by students from the Engineering Technology program at the University of XXX XXX.

AU - Immanuel Edinbarough
AU - Jose Jaime Taha-Tijerina
CY - Portland, Oregon
DA - 2024/06/23
PB - ASEE Conferences
TI - Prototyping Low-Cost Tribometer with Block on Ring Configuration for the Optimization of Metal-Forming Applications
UR - https://peer.asee.org/47902
ER -